Product
Aeson Power FAB Series Front Terminal GEL 100Ah
Valve Regulated Lead Acid Battery
- 12 years of design life in floating condition
- Wide operating temperature range from -15°C to 60°C
- Advanced paste formula with increased recharge efficiency
- Front access terminal with standard width for 19” and 23” ETSI racks
- 30% decreased float current leads to excellent high-temperature resistance
- Thick flat plate with high Tin low Calcium alloy
- Low self-discharge rate
- Excellent deep discharge recovery capability
Charging voltage and settings
- Constant voltage charging is recommended
- Recommended float charge voltage: 2.25Vpc@ 25°C
- Float voltage temperature compensation: -3mV/°C/cell
- Equalize charge voltage: 2.35 Vpc @25 °C
- Charge current allowable: 0.25C 10A
Construction
- Positive plate: Thick high Sn low Ca grid minimise corrosion and prolong life
- Negative plate: Balanced Pb-Ca grid for improved recombination efficiency
- Separator: Advanced AGM separator for ultra low float current
- Electrolyte: Dilute high purity sulphuric acid with nano gel
- Battery container and cover: ABS
- Pillar seal: 100% factory tested, proven two layers epoxy resin seal
- Relief valve: Complete with integrated flame arrestor
Details
| Suited for | Telecom outdoor applications, renewable energy systems and other harsh environment applications. |
|---|---|
| Model | FAB12-100 |
| Nominal Voltage (V) | 12 |
| Capacity (Ah) | 100 |
| Dimensions (mm) | 558 (L) x 112 (W) x 295 (H) |
| Weight (kg) | 40.5 |
| Terminal | M8 Fem |
| Compliance Standards | IEC 60896-21/22, Eurobat guide long life, BS6290 part 4, JISC 8704, YD/T 799, and UL1989. |
